EVERT compressors
Piston compressors
EVERT offers several types of piston compressors. These are currently the most commonly used drive and power sources for pneumatic machines in car workshops.
Most piston compressors consist of an electric motor, a compressor unit and a tank. Additional elements include the drive transmission unit and its shaft. The compressor unit's structure resembles an engine, with a crankshaft, connecting rods and pistons. The crown of the structure is the head. The compressor is controlled by a pressure switch, which can be equipped with thermal protection.
Pressure tanks in some versions can be galvanized, which extends their warranty to 10 years. The maximum pressure produced by piston compressors depends on their version and can be 8, 10 or even 15 bar. When adapting a piston compressor to our needs, we must remember that the effective efficiency of such a device is approximately 50% of the maximum efficiency, because devices of this design need time to cool down, which, depending on the model, ranges from 30-60% of the total operating time.
EVERT's offer includes the following types of piston compressors
- Professional series with belt transmission, made in the EU, low-speed compressor blocks, Condor pressure switch, max pressure 10 bar, 3-year warranty.
- Professional GK series with belt transmission, made in the EU, low-speed compressor blocks, Condor pressure switch, max pressure 10 bar, 3-year warranty with galvanized tank. ‘
- The exception is the EVERT1500/500/15KSD model with a maximum pressure of 15 bar.
- Professional series with belt transmission K, made in the EU, low-speed compressor blocks, Condor pressure switch, max pressure 15 bar, 3-year warranty.
- Some S models are equipped with star-delta starting for easier starting.
- EVERTHD series, available in versions with a maximum pressure of 10 and 15 bar, with galvanized tanks with a 10-year warranty. These models have a 2-year warranty on the pump and pressure switch and a 3-year warranty on the engine.
- Mobile compressors, on 24L and 50L tanks, with a 230V power supply and a maximum pressure of 8 bar.
Screw compressors
EVERT screw compressors are based on the latest technologies and solutions available on the market, as well as experience resulting from many years of production. Due to the fact that more and more attention is paid to minimizing energy losses, and thus to significant savings for the owner's pocket and the natural environment, more and more workshops decide to purchase a screw compressor. The work performed by the screw module is much more effective, has much lower energy loss into heat, which means that screw compressors do not need time to cool down and can be used without interruption. Therefore, the theoretical efficiency of such a structure is consistent with the actual one.
The EVERT offer includes 4 types of screw compressors:
- EVERT-X series compressors, equipped with DIRECT DRIVEN 1:1 direct drive, permanent magnet synchronous motors, energy-saving screw module, optional inverter (IVR), versatile MAM-8060 or MAM-870 control module, Wi-Fi module, auto- restart, covered by a 3-year warranty with an option to extend it for a maximum of 5 years.
- EVERT BASIC series compressors, based on compressor modules from the famous Italian brand Atlas Copco. They are covered by a 5-year warranty.
- The EVERT PLUS series compressors are the BASIC version equipped with a modern ES 4000 control panel with an icon-based display that allows you to read operating parameters such as pressure, oil temperature, number of hours worked, errors read or information about the need for inspection. They are covered by a 5-year warranty.
- EVERT HD series compressors are devices manufactured in Poland, equipped with a modern L26S control panel and a galvanized tank with a 10-year warranty. Versions with an air dryer also contain built-in fine and final filters that allow you to clean the air of dirt as small as 0.01 microns. They are covered by a 5-year warranty.
Compressors catalog
Ask about the product
[email protected]